Official Embedded Systems & IoT Curriculum · ISO 9001:2015

Embedded Systems & IoT
Microcontrollers, Protocols & Connected Systems

Bridge hardware firmware and cloud intelligence: master Embedded C, 8051 & ARM Cortex architecture, sensor networks (I2C/SPI/UART), ESP32 Wi-Fi/BLE nodes, FreeRTOS multitasking, MQTT telemetry, and AWS IoT Core across 15 Days, 30 Days, 45 Days, 60 Days, and 6 Months courses.

5 Tracks15d, 30d, 45d, 60d, 6m
180+ HrsHardware Labs
100%Live Lab Kits
FreeRTOS & AWSIndustrial IoT
Embedded & IoT Technology Stack Core Hardware
ARM / 8051Microcontroller Firmware
ESP32 & BLEWireless Edge Node
I2C / SPI / UARTIndustrial Bus Protocols
MQTT & LoRaCloud Telemetry
FreeRTOSMultitask Scheduling
AWS IoT CoreEnterprise Device Fleet
Hardware Lab Kit Provided:

ESP32 development board, ARM/8051 trainers, DHT22, MPU6050, Ultrasonic, Relays, OLED display, and communication gateways.

Structured Corporate Curriculum

Choose Your Embedded & IoT Duration

Tailored learning tracks designed for electronics engineers, computer science students, and working professionals. Switch between 15 Days, 30 Days, 45 Days, 60 Days, and 6 Months courses.

Fast-Track Crash Course

15 Days Fast-Track Embedded Systems & IoT (30 Hours)

Quick-start fundamentals: Embedded C, 8051 / ARM microcontroller basics, GPIO bit-manipulation, ADC sensor reading, ESP32 Wi-Fi connection, and cloud telemetry dashboard.

Enroll in 15-Day Track
Duration: 15 Days
Total Time: 30 Hours (2 hrs/day)
Capstone: Smart Room Ambient Environmental Telemetry Node
01

Embedded C & Microcontroller Basics

Days 1 - 5
  • Microcontroller vs Microprocessor architecture
  • Embedded C data types, bitwise operators & registers
  • GPIO configuration, digital input/output & debouncing
Lab: Write register-level C code to control LED sequences and push-button switches.
Embedded CRegistersGPIO
02

Timers, ADC & Sensors Interfacing

Days 6 - 10
  • Hardware timers, PWM signal generation & buzzer tone
  • Analog-to-Digital Converter (ADC) multi-channel sampling
  • DHT11/22 temperature, ultrasonic HC-SR04 & LDR light sensors
Lab: Build temperature-controlled relay cooling and distance alert system.
ADCPWMTimersDHT22
03

ESP32 Wi-Fi & IoT Cloud Dashboard

Days 11 - 15
  • ESP32 SoC architecture, pinout & Arduino core
  • Wi-Fi station mode, HTTP GET/POST & JSON formatting
  • Cloud dashboard integration (Adafruit IO / Blynk) with trigger alerts
Deliverable: Complete Smart Room Environment Monitor sending live metrics to cloud.
ESP32Wi-FiBlynkCloud Alerts
Beginner Foundation Level

30 Days Embedded Systems & IoT Foundation (45 Hours)

Deep dive into communication protocols (UART, I2C, SPI), peripheral driver development, motor controls, MQTT telemetry pipelines, and smart automation.

Enroll in 30-Day Track
Duration: 30 Days
Total Time: 45 Hours (1.5 hrs/day)
Capstone: Smart Automated Greenhouse Controller with MQTT
01

Advanced Embedded C & Structs

Week 1
  • Pointers, memory allocation & function pointers
  • Finite State Machines (FSM) implementation
  • Hardware interrupt service routines (ISR)
Lab: Write non-blocking state machine for traffic light and keypad lock.
02

Serial Protocols (I2C & SPI)

Week 2
  • UART packet framing, baud rate & ring buffers
  • I2C protocol: Master-Slave, 7-bit addressing, OLED SSD1306
  • SPI protocol: Clock polarity/phase, SD card logging
Lab: Interface 0.96" OLED display and external I2C EEPROM.
03

Actuators & Power Control

Week 3
  • Relay module isolation & optocoupler circuits
  • Servo motor angle control & DC motor H-Bridge (L298N)
  • Low power deep-sleep modes on ESP32
Lab: Build automated solar pump valve control with battery monitor.
04

MQTT Telemetry Pipeline

Week 4
  • MQTT protocol: broker, topics, QoS 0/1/2, keep-alive
  • Cloud MQTT broker (HiveMQ / Mosquitto) integration
  • Responsive mobile IoT dashboard with bi-directional switches
Deliverable: Greenhouse monitor streaming soil, humidity, and valve controls.
Intermediate Professional Track

45 Days RTOS & Wireless IoT Engineering (90 Hours)

Master real-time multitask scheduling with FreeRTOS, BLE 5.0 wireless profiles, ThingsBoard industrial dashboards, and Over-the-Air (OTA) firmware deployment.

Enroll in 45-Day Track
Duration: 45 Days
Total Time: 90 Hours (2 hrs/day)
Capstone: Wearable Patient Health Hub with BLE & Cloud Sync
01

FreeRTOS Real-Time Kernel

Tasks creation, preemptive priority scheduling, inter-task communication with Queues, Semaphores, and Mutex resource locks.

Lab: Build dual-task firmware where Core 0 handles sensor acquisition and Core 1 handles network telemetry without jitter.
FreeRTOSQueuesSemaphoresDual Core
02

Bluetooth Low Energy (BLE 5.0)

BLE GAP/GATT architecture, custom services, characteristics, notifications, and smartphone connection via nRF Connect / Web Bluetooth.

Lab: Broadcast real-time heart rate and SpO2 readings over BLE GATT characteristics.
BLE 5.0GATTnRF ConnectMobile Sync
03

ThingsBoard & OTA Updates

Industrial IoT platform ThingsBoard, widget customization, telemetry rules, and Over-the-Air (OTA) secure firmware updates over Wi-Fi.

Deliverable: Remote firmware update server with health dashboard and fall alerts.
ThingsBoardOTATelemetryFirmware
Industrial IoT Expert Track

60 Days Industrial IoT & AWS Cloud Architecture (120 Hours)

Enterprise grade systems: RS-485 Modbus RTU/TCP, CAN Bus, LoRaWAN long-range telemetry, AWS IoT Core Device Shadows, and hardware security encryption.

Enroll in 60-Day Track
Duration: 60 Days
Total Time: 120 Hours (2 hrs/day)
Capstone: Industrial Predictive Motor Vibration & Power Telemetry System
01

Industrial Fieldbuses (Modbus & CAN)

RS-485 differential signaling, Modbus RTU registers, CAN Bus 2.0B frames with MCP2515 transceiver for automotive and factory automation.

Lab: Interrogate industrial energy meter over RS-485 Modbus and read voltage/current.
02

LoRa & Long-Range Networks

Sub-GHz radio modulation, Semtech SX1276/78 transceivers, LoRaWAN Class A/C device stacks, TTN gateway routing, and packet decoding.

Lab: Transmit farm soil telemetry over 5+ km LoRa link to a central gateway receiver.
03

AWS IoT Core & Cloud Pipelines

X.509 certificates, TLS mutual authentication, Device Shadow state synchronization, AWS IoT Rules Engine, DynamoDB, and Grafana.

Lab: Stream authenticated sensor telemetry to AWS IoT Core and trigger automated Lambda alerts.
04

IoT Security & Cryptography

Secure boot, flash encryption, AES-256 hardware acceleration, preventing physical JTAG exploits and securing firmware updates.

Deliverable: Production predictive maintenance gateway with cryptographic telemetry.
Master Diploma Apprenticeship

6 Months Master Diploma in Embedded Firmware, Edge AI & Hardware Production (180 Hours)

Complete full-lifecycle qualification: Bare-metal ARM Cortex-M register programming, TinyML on-device computer vision, KiCad PCB schematic & layout design, and hardware fabrication.

Enroll in 6-Month Track
Duration: 6 Months (Semester)
Total Time: 180+ Hours + Lab Access
Capstone: Commercial Smart City Edge AI Anomaly Hub with Custom PCB
01

Bare-Metal ARM Cortex-M Drivers

CMSIS hardware abstraction, startup assembly, vector tables, register-level clock trees, NVIC nested interrupts, and DMA controllers.

Lab: Write bare-metal UART and DMA ring buffer drivers from scratch without external HAL.
ARM Cortex-MCMSISDMARegisters
02

TinyML & Edge Vision AI

Deep learning for microcontrollers: Edge Impulse studio, model quantization (INT8), TensorFlow Lite for Microcontrollers (TFLM), and ESP32-CAM object detection.

Lab: Train and deploy on-device acoustic anomaly detector and facial recognition doorbell.
TinyMLEdge ImpulseESP32-CAMTensorFlow Lite
03

PCB Design & Production Manufacturing

KiCad schematic capture, PCB footprint assignment, 2-layer routing, ground planes, decoupling capacitors, Gerber generation, and SMD soldering.

Deliverable: Fabricate custom PCB board with embedded MCU, power regulators, and sensors.
KiCadPCB LayoutGerberSMD Soldering
Systematic Execution

Sample 15-Day Lab Roadmap

Every day includes structured theory, circuit breadboarding, live coding, and instructor validation.

Day Core Subject Focus Hands-on Lab Exercise Tools / Hardware
Day 1 Embedded Systems Architecture & C Fundamentals Setup Toolchain, Bitwise Operations, Register Masking in C GCC, VS Code, Simulators
Day 2 Microcontroller GPIO Programming & Digital I/O LED chaser sequences, push-button polling & software debouncing 8051 / ARM Trainer, LEDs
Day 3 Hardware Timers & Pulse Width Modulation (PWM) Generating precise delays, duty cycle dimming & buzzer alerts Oscilloscope, Timers
Day 4 Analog-to-Digital Conversion (ADC) Sampling Reading Potentiometer, LDR light level & LM35 temperature Internal ADC, Sensors
Day 5 Serial Communication (UART) Protocol Transmitting telemetry strings, parsing serial command packets USB-UART CP2102, Terminal
Day 6 I2C Protocol & Display Interfacing Displaying dynamic sensor readings on 16x2 LCD & OLED display I2C Bus, SSD1306 OLED
Day 7 Relays, Actuators & High-Voltage Loads Controlling AC light bulbs & cooling fans via opto-isolated relay 5V Relay Module, Optocoupler
Day 8 Ultrasonic Distance & Motion Detection Proximity measurement, parking assistance alarm prototype HC-SR04, PIR Sensor
Day 9 Introduction to ESP32 IoT Development Board ESP32 dual-core pinout, GPIO multiplexing, setting up Arduino core ESP32-WROOM-32
Day 10 Wi-Fi Networking & HTTP Client Requests Connecting to Wi-Fi access point, making HTTP GET/POST API requests ESP32 Wi-Fi Stack
Day 11 JSON Data Serialization & Parsing Encoding multiple sensor parameters into standardized JSON format ArduinoJson Library
Day 12 MQTT Pub/Sub Telemetry Protocol Publishing sensor packets to cloud MQTT broker with keep-alive Mosquitto, HiveMQ
Day 13 Cloud IoT Dashboards & Mobile UI Connecting ESP32 to Blynk & Adafruit IO, live gauge widgets Blynk Mobile App, Web GUI
Day 14 Automated Alerts & Trigger Rules Configuring email and Telegram notifications on temperature thresholds Webhooks, Telegram Bot API
Day 15 Capstone Evaluation & Certificate Award Demonstration of complete Smart Environment IoT node & project review Hardware Showcase & Viva
Lab Infrastructure

Hardware Kits & Software Tools

Industry-standard microcontrollers, test equipment, development IDEs, and cloud platforms used in our physical labs.

Microcontrollers

  • ESP32-WROOM / ESP32-S3
  • ARM Cortex-M (STM32)
  • 8051 Microcontroller Trainer
  • Arduino Uno / Nano
  • Raspberry Pi Gateway

Sensors & Modules

  • DHT22 / BME280 Ambient
  • MPU6050 6-Axis Gyro/Accel
  • Soil Moisture & NPK Sensor
  • RS-485 Modbus Transceivers
  • Semtech SX1278 LoRa Node

Software & IDEs

  • Embedded C / C++
  • VS Code & PlatformIO
  • Keil µVision / STM32CubeIDE
  • KiCad PCB Design Suite
  • FreeRTOS Kernel

Cloud & Telemetry

  • AWS IoT Core
  • ThingsBoard Community
  • HiveMQ & Mosquitto MQTT
  • Blynk IoT & Adafruit IO
  • Edge Impulse TinyML
Flexible Timing

Batch Schedules & Delivery Modes

Choose regular weekday morning/afternoon batches or weekend intensive sessions with full lab access.

Weekday Morning

Monday to Friday (10:00 AM - 1:00 PM)

Ideal for college students during semester breaks or early-day learners.

Register Morning Slot

Weekday Evening

Monday to Friday (2:30 PM - 5:30 PM)

Dedicated lab batch with one-on-one hardware mentoring and debugging.

Register Evening Slot

Weekend Fast-Track

Saturday & Sunday (10:00 AM - 4:00 PM)

Designed for working professionals and engineering final-year scholars.

Register Weekend Slot
Walk-In Centers

Gateway Software Solutions Branches

Visit our physical training labs across Tamil Nadu for hands-on equipment kits.

Coimbatore (HO)

Ram Nagar / Gandhipuram

+91 88701 48881

Chennai

Vadapalani / Ashok Nagar

+91 74186 88845

Erode

Perundurai Road

+91 99440 98882

Madurai

KK Nagar

+91 90427 07229

Ready to Engineer the Connected Future?

Book a free technical session with our senior embedded architects or enroll directly in your preferred track.